American-expedition-vehicles JK HEMI Builder Kit - Installation Guide for 12+ J Uživatelský manuál stáhnout pdf (Strana 23)

V. ENGINE BAY PREparations

1. Remove the factory coolant bottle.

2. Remove fan assembly

3. Remove AC lines. Save the pressure switch and O-Ring for later use.

4. Remove the cooling module.

5. Strip the cooling module. Everything will be reused except the radiator.

6. Install the supplied power steering cooler. Use the AEV supplied spring clamps NOT the hose clamps

provided with the cooler (g 31).

Figure 31

7. Install the AC condenser/transmission oil cooler/steering cooler assembly onto the supplied AEV

Hemi radiator using the factory hardware and supplied p-clips, and petcock (g 32).

Figure 32

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 36 37

Žádné komentáře

American-expedition-vehicles JK HEMI Builder Kit - Installation Guide for 12+ J Uživatelský manuál Strana 23